Superfoam Drilling Foam Liquid
RXSOL DRILLING FOAM RX is a proprietary mixture of biodegradable surfactants and foam stabilizers which is designed to produce high performance foam using fresh, brackish and sea water for various drilling operations.
SUPERFOAM DRILLING FOAM RXSOL is a biodegradable mixture of surfactants and foam stabilizer which has been formulated as a foaming agent fresh, brackish and sea water for various drilling operations.
Foam PLUS is an upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.
SUPERFOAM DRILLING FOAM RXSOL may be used in a variety of drilling operations. Oil Well Drilling, ranging from simple air drilling to stiff foam drilling where the foam is reinforced by the use of polymers.
Superfoam Drilling foam FOAM PLUS is a upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.
SUPERFOAM DRILLING FOAM by RXSOL is one of the most superior foaming agents with special polymer base additives which not only help in stabilizing foams but also enhance the lubricity during drilling operations in the fields.
DRILLING FOAM RXSOL concentration may vary depending on the specific drilling system and equipment used. However for air drilling, drill foam can be used as an effective dust suppressant, at 0.1 - 0.2% by volume in injection water. For normal drilling condition, foam can be used as 0.5-1% by volume in injection water.
DRILLING FOAM RXSOL can be mixed in water tank and introduced into the airstream. A foam injection pump with nozzle can be used. The foam drill concentration may vary depending on the specific drilling system and equipment used. Use water as clean as possible to mix to prevent fines and dirt from damaging or blocking suction-line filters of the small parts and passages of the foam pump.
SuperFoam Drilling Foam for Oil and Gas Recommended Treatment:
Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
- Air drilling: 0.1-0.2%
- Mist Drilling: 1.0%-2.0%
- Stiff foam drilling: Mix Drilling Foam, 0.1-0.2% as foam stabilizer or 0.2-0.4%, Drilling Foam Foam Plus 1.0-1.5%
Features & Benefits :::
- It is fluorine free, non-toxic & biodegradable foam and hence environment friendly and poses no threat to workers and environment.
- Lubricates and cools the drill bit improves the hole cleaning
- Effectively carries cutting to surface and hence enhance the rate of cutting removal
- Reduces borehole erosion when drilling poorly consolidated formations
- Improves hole cleaning and increases penetration rates
- Effective in dust suppression during air drilling operation
- Reduces air requirements
- Reduces the tendency of softer clays to stick together
Handling and Storage ::
DRILLING FOAM RXSOL should be stored in the original supplied package for getting a long shelf life. It can also be stored in stainless steel containers. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, thawing with gentle remixing will render the product completely usable.
| Parameter | Test Method | Unit | Result |
| pH @ 25°C (1% Solution) | METS IP 81 | – | 7.36 |
| Determination of Biodegradability | METS IP-80 | % | 90.37 |
| Specific Gravity @ 25°C | Measurement | – | 1.0467 |
| Solubility | Visual/Gravimetric | – | Soluble |
| Viscosity @ 20°C (Spindle-2, Speed-60 rpm, Torque-74%) | Viscometer | cP | 603 |
| Non-Volatile Content | Gravimetry | % | 10.77 |
| Foam Generation (1% Solution with Fresh Water) | Gravimetry/Volumetry | mL | 530 |
| Foam Stability (1% Solution with Fresh Water) | Gravimetry/Volumetry | Sec | 205 |
| Salt Tolerance (1% Solution with 5% NaCl) - Foam Generation | Gravimetry/Volumetry | mL | 360 |
| Salt Tolerance (1% Solution with 5% NaCl) - Foam Stability | Gravimetry/Volumetry | Sec | 212 |
| Thermal Stability - Foam Generation | Gravimetry/Volumetry | mL | 510 |
| Thermal Stability - Foam Stability | Gravimetry/Volumetry | Sec | 170 |
Heavy Metal Test Report of Superfoam Drilling Foam Liquid
| Parameter | Test Method | Unit | Result |
| Lead (Pb) | METS IP 76 | ppm | ND |
| Arsenic (As) | METS IP 76 | ppm | ND |
| Cadmium (Cd) | METS IP 76 | ppm | ND |
| Mercury (Hg) | METS IP 76 | ppm | ND |
| Antimony (Sb) | METS IP 76 | ppm | ND |
ND: Not Detected
How to increase foaming during drilling operations?
Start with the manufacturer's recommended dosage and increase gradually if additional foam is required.
| Drilling Conditions | Recommended Dosage |
|---|---|
| Normal formations | 0.2-0.5% (2-5 L per 1000 L water) |
| Dry, fractured formations | 0.5-1.0% (5-10 L per 1000 L water) |
| Heavy dust or difficult formations | 1.0-2.0% (10-20 L per 1000 L water) |
Excessive dosage may not always improve foam quality and can increase operating costs.
- Low hardness water
- Neutral pH (6.5-8.5)
- Low suspended solids
#DRILLINGFOAMmanufacturerinUAE
#DRILLINGFOAMLIQUIDmanufacturerinGCC
#DRILLINGFOAMLIQUIDinSaudiArabia
How is RXSOL Superfoam Drilling Foam liquid saving you money in water well drilling operations?
SUPERFOAM Drilling Foam Liquid is a very concentrated product with high foam generation capability in small concentrations such as 0.5% and 1%. Apart from the excellent foam generation quality, the stability of the foam in fresh water as well as saline water (salty water) is very high as can be seen in the Technical Properties reports.
Find below table showing meaning of each parametyer of SUPERFOAM Drilling Foam Liquid:
| Parameter | Your Result | Industry Assessment | Rating |
|---|---|---|---|
| pH (1%) | 7.36 | Neutral, ideal | Excellent |
| Biodegradability | 90.37% | Very environmentally friendly | Excellent |
| Specific Gravity | 1.0467 | Typical for concentrated liquid foam | Very Good |
| Solubility | Soluble | Required | Excellent |
| Viscosity | 603 cP | Easy pumping with good concentrate stability | Very Good |
| Fresh Water Foam Height | 530 ml | Very high | Excellent |
| Fresh Water Foam Stability | 205 sec | Very good | Excellent |
| Salt Water Foam Height | 360 ml | Good salt tolerance | Good |
| Salt Water Stability | 212 sec | Excellent | Excellent |
| Thermal Foam Height | 510 ml | Excellent | Excellent |
| Thermal Stability | 170 sec | Good | Very Good |
Drilling Foam RXSOL manufacturer and supplier in India UAE Middle East Oman Nairobi, Mumbai, Kolkata, Chennai, Visakhapatnam, Kakinada, Hazira Surat, Gandhidham Surat Gujrat, Vizag, Muscat, Sohar, Barka, Sudan, Yemen, Fujairah, Dubai, Abudhabi, Sharjah, West Bengal
#drillingfoam_manufacturer
#drillingFOAM_supplier
#DRILLINGfoam_muscatOMAN
#drillingfoam_dubaiUAE
Advantages of Drilling Foam:
- Environmentally friendly and biodegradable, it does not pollute
- Generates instant high foam quality of exceptional stability
- Economical, produces stable foam at low concentrations
- Compatible with all types of makeup water including brackish, salty and hard water
- Improves hole cleaning and increases penetration rates
