Aqua Clean Tuff High Foam

Description

Aqua Clean Tuff liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is - Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

beams, girders, and other structure.

Aqua Clean Tuff plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.

Application

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aqua Clean Tuff CLEANER plays very important role in washing down with use of chemicals. Aqua Clean Tuff classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Dosage & directions

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using Aqua Clean Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the Aqua Clean Tuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the Aqua Clean Tuffv has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the Aqua Clean Tuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of Aqua Clean Tuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of Aqua Clean Tuff in correct dosages is half the job done.

General Cleaning :- Aqua Clean Tuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination Aqua Clean Tuff CLEANER should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of Aqua Clean Tuff to a bucket of water. The Aqua Clean Tuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aqua Clean Tuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, Aqua Clean Tuff is not recommended for washing machines.

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

Technical specification

Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch. After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use Aqua Clean Tuff hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.

Handling & precautions

Hold Cleaning Preparation and Method :

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges :

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Notes

Aqua Clean Tuff is absolutely free along with the purchase of Slip Barrier Coat - Hold block materials. Aqua Clean Tuff Free 1000 Ltr against 1000 Ltrs purchase of Slip Barrier Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Material safety data (MSDS)

Heading1 - RX Chemicals

Product Name	:	RXSOL-25-3033-210
Product Type	:	Aqua Clean Tuff

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Branch ::: Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Oman, Nairobi

Phone	:	+91 22 27815541 / 42
Fax	:	+91 22 2781 1318 :::AOH :0091 9821214367
Email	:	mail @ rxmarine.com

Heading2 - RX Chemicals

Chemical Name	Concentration	CAS Number	EC Number	R Phrases*	Symbols
Potassium Hydroxide	10-15%	1310-58-3	215-181-3	35	C
2-butoxy ethanol	1-5%	111-76-2	203-905-0	X
Fatty alcohol ethoxylate	5-10%	34398-01-1	500-084-3	41
Di-Sodium Meta Silicate	1-5	10213-79-3	229-912-9	34,37
Disodium cocoamphodiacatate	1-5	68650-39-5	272-043-5	36 Xi
Cocamide DEA	1-5	68603-42-9	271-657-0
Non classified ingredients	60-70

Heading3 - RX Chemicals

Odour	Odourless
Appearance	Liquid, colourless , soluble in water
Contact with eyes	Corrosive to eyes, Can cause damage to the eyes
Contact with skin	Causes burns (R35)
Inhalation	No information available but must be considered harmful
Ingestion	Harmful if swallowed (R22)

Heading4 - RX Chemicals

Contact with skin	Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water.Seek medical advice if necessary
Contact with eyes	If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives.
Ingestion	Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention.
Inhalation	Seek medical attention if ill effects occur
General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) When in doubt or symptoms persist, seek medical attention

Heading5 - RX Chemicals

Non combustible. Smoke from fires is corrosive. Not flammable. In case of fire use extinguishing media appropriate to surrounding
conditions. Vapour density - not applicable.

Heading6 - RX Chemicals

Personal Precautions	Wear protective clothing as per section 8
Environmental Precautions	Do not allow to enter public sewers and watercourses
Clean Up Actions	Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid
Special Precautions	Wear protective clothing as per section 8

Heading7 - RX Chemicals

Handling	Eyewash bottles should be available.See Section 8.
Storage	Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

Heading8 - RX Chemicals

Exposure Limits	OES / LTEL # ppm 2 mg/m3 (Sodium hydroxide).
Exposure controls	No special ventilation is required unless the product is used in a spray form.
Occupational exposure controls	Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42).

gloves suit. goggles no_smoking

Gloves Suit. Goggles No_Smoking

Heading9 - RX Chemicals

Odour	Odourless
Appearance	Liquid, colourless to yellow, soluble in water
pH	11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration
Boiling point	>100 °C at 760 mm /Hg
Vapour pressure	not known
Vapour density	not applicable
Freezing point	5 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)	1.23
Non combustible

Heading10 - RX Chemicals

- This article is considered stable under normal conditions
- Avoid overheating, Keep away from frost
- Incompatible with acid
- See Section 5

Heading11 - RX Chemicals

Toxicological information	No experimental data available.
Inhalation	Can cause damage to the respiratory system.
Contact with skin	Causes severe burns (R35).
Contact with eyes	Causes severe burns (R35).
Ingestion	The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system.
Carcinogenicity	No evidence of carcinogenic effects.

Heading12 - RX Chemicals

Ecotoxicity	"In general, this cleaning agent main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." and Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Mobility	Completely soluble in water
Persistence and Biodegradability	Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable.
Bioaccumulation Potential	Bioaccumulation of the components in this product is insignificant.
Other Adverse Effects	No environmental problems are expected when the product is used / handled correctly.

Heading13 - RX Chemicals

Classification	Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Disposal considerations	"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable."

Heading14 - RX Chemicals

Proper Shipping Name		HYDROXIDE, SOLUTION
UN
	Proper Shipping Name	Potassium hydroxide, solution
	UN NO	1824
	Hazard Class	8	Packing Group	II
Road/Rail (ADR/RID)
	Proper Shipping Name	Potassium hydroxide, solution
	ADR UN No	1824
	ADR Hazard Class	8	Termcard	80S1824
Sear (IMDG)
	Proper Shipping Name	Potassium hydroxide, solution
	IMDG UN No	1824
	IMDG Hazard Class	8	IMDG Pack Group	II
	IMDG EmS	F-A, S-B	IMDG subrisk	NA
	IMDG Labels		IMDG Flash point	N/A
Air(ICAO/IATA)
	Proper Shipping Name	Potassium hydroxide, solution
	ICAO UnNo	1824
	ICAO Hazard Class	8	ICAO Packing Group	II
	ICAO subrisk	N/A	ICAO Labels	8, CAO
	ICAO Flash point	N/A
DOT/CFR(US Department of Transportation
	DOT Proper Shipping Name	Potassium hydroxide, solution
	Hazardous Material	Potassium hydroxide
	Hazard Class	8	Identification Number
	Product RQ (lbs)	3640	DOT subrisk	N/A
	DOTLabels	8	DOTFlashpoint	N/A

- Forbidden on passenger aircraft

Heading15 - RX Chemicals

Risk Phrases	Non Corrosive
Safety Phrases	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Heading16 - RX Chemicals

(R35: Causes severe burns. R41: Risk of serious damage to eyes.) The information provided about the product on this Safety Data Sheet has
been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety
Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties
The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage
in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Classification	Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Disposal considerations	"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable."

Procedure

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using Aqua Clean Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the Aqua Clean Tuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the Aqua Clean Tuffv has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the Aqua Clean Tuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of Aqua Clean Tuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of Aqua Clean Tuff in correct dosages is half the job done.

General Cleaning :- Aqua Clean Tuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination Aqua Clean Tuff CLEANER should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of Aqua Clean Tuff to a bucket of water. The Aqua Clean Tuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aqua Clean Tuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, Aqua Clean Tuff is not recommended for washing machines.

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

Useful area

Ship marine hold cleaning chemicals

Aqua Clean Tuff most suitable for cargo hold and tank cleaning.

ALKAATuff High Foam CLEANER plays very important role during ship hold cleaning , Its high foam abilityincreasing ALKAATUFF cleaning power on the vertical surface, As liquid product can't sustain on the vertical surface while HIGH composite FOAM can sustain on the surface which is resulting from good cleaning effect.
Extra foaming is major features which is differentiating ALKAATUFF high foam to general ALKAATUFF.

Aqua Clean Tuff using procedure and cleaning method :
1st Step Cleaning of extra and excess loose particle:::
Before applying Aqua Clean Tuff on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual.
2nd step is for Mixing and dilution of ALKAATuff High Foam CLEANER:::
If cleaning step is with HP machine ( High Pressure ), Then mix concentrated ALKAATUFF high foam with fresh water, it can be diluted 1 Ltrs Aqua Clean Tuff CLEANER with 4 to 5 Ltrs Fresh water.

If cleaning step followed by hand spray, Then apply Aqua Clean Tuff neat on the surface. Approx 1 ltr covers 10 to 12 square meter.

3rd Step final procedure:::

Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 - 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.

Industrial area

Shipping Tanker, Bulk Carrier cleaning agent, Hold Cleaning Agent. Heavy Duty Alkaline Cleaner with Extra Foaming Effect.

Aqua Clean Tuff is absolutely free along with the purchase of slip barrier coat - Hold block ( Pre load ) materials. ALKAATUFF High foam Free 1000 Ltr with the purchase of 1000 ltrs Slip Barrier Coat Plus is available at Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf

Here the question that arises is why Aqua Clean Tuff is so important during Ship Hold Cleaning?

Aqua Clean Tuff is alkaline in nature which neutralizes the acidic residue created due to the presence of moisture and products like coal, sulphur, salt etc. And emulsification effect of Aqua Clean Tuff makes alll oil stain water soluble. It means ALKAATUFF High Foam CLEANER major role is to neutralize the acidic residue and emulsifying Oil residue. One more important feature of Aqua Clean Tuff results in the formation of dense foam with high-pressure machines, which can easily be applied even on vertical surfaces.

Aqua Clean Tuff - Acts as an Acid Neutralizer - Useful for coal, Sulfur, Salt as its residue when in contact with water, is acidic in nature which directly damages the painted and metal surfaces.

Aqua Clean Tuff - Acts as an Oil residue Emulsifier - Useful for removal of coal and oily residue.

Aqua Clean Tuff - Results in Dense foam - Can be applied on the vertical surface for the long duration.

The largest supplier of Aqua Clean Tuff in Asia ( India and Middle East). More details of Aqua Clean Tuff like MSDS and Using procedure of will be available through this link

Tag identification

Cargo Hold Cleaner, Bulk Hold cleaning etergent, Chemical Agent for hold cleaning, Hold Cleaning Kits detergent

Importance of Alkaleen Safety Liquid / Aqua Clean Tuff Cargo hold cleaner for coal and pet coke:

Alkaatuff High foam and Aqua Clean Tuff / Alkaleen Safety Liquid cleaner is most common marine cleaning chemicals for cargo hold cleaning after coal and pet coke.

Two Major Benefit of cleaning of Pet Coke:-

Pet coke residue contains oil content, which is creating more difficulties during the cleaning operation. Aqua Clean Tuff high foam and one of our specialized product called Alkaleen Safety Liquid which is absolutely non-hazardous and biodegradable cleaner.

Petcokes also have sulphur content which is the main cause of corrosion due to its electrochemical corrosion mechanism. In presence of moisture and sulfur metal surface charges as anodic and damaging the hold paint due to electrical ion charges. Here presence of Alkaleen Safety Liquid / Aqua Clean Tuff increasing the alkaline effect and neutralizes the effect of Sulphur.

#ShipHoldCleaningDetergent
#AcquaTuffHIGHfoam
#HoldCleaningChemical_IndiaUAEoman

Alkaline Ship Hold Cleaning Detergent Manufacturer and supplier in India UAE Omna Mumbai, Kakinada, Vizag, Chennai, Kolkata, Haldia, Paradip, Hazira, Gandhidham Kandla, Abudhabi, Ajman, Fujairah, Dubai, Sohar, Muscat Oman

Other names

Aqua Tuff High Foam Ship Hold cleaning Alkaline Detergent, CarecleanWAF, Waterbased Alkaline Foam, Alkaline Detergent Heavy Duty, APEX 480XF High Foam, Aquatuff High Foam 220 Ltr

Keywords

Aqua Clean Tuff for bulk carrier cargo hold cleaning alkaline detergent, Other then Aqua Clean Tuff cargo hold cleaning chemicals lime washing chemicals for cargo holds and pet coke cargo hold washing detergent also popular for specificed lime and and pet cargo. We are also keeping ready stock of cement hold cleaning chemicals, Hold Block - Slip polymer Barrier Coat, Hold Wash etc...

Suitable hold cleaner plays important role to clean ship hold on time. Slection of cleaner always be wise decision to save time and perfectness on cleaning. Aqua Clean Tuff HOLD CLEANING ALKALINE DETERGENT - Alkatuff is one of popular high foam alkaline cleaner which is also treated as versatile cleaner as well as plays role to neutralize acidic residue created by cargo on contact with moisture. Cement remover is also specialized product for cement wash, coal remover, lime remover, Bilge coat, Gypsum remover, PCS hold clean, alkaline cleaner, Muriatic Acid, Sodium Hypo Chlorite, Pet coke remover, Slip polymer Barrier Coat Hold Block etc... Some times we observed that presence of Sea voyage cleaner on board also plays important role to degrease oil and soiled mass from surface. And Metal clean bright helps to remove rust from open hold surface area and also effective to dissolve rust stain from painted surface.

Cargo Product	Product Nature	Characteristics
Sulphur	Alkaline Cleaner	Alkaline Cleaner, Aqua Clean Tuff, Holdbrite
Anthracite - Hard Coal	Alkaline Cleaner	ALKAATUFF High Foam
Bauxite	Alkaline Cleaner	ALKAATUFF High Foam
Bentonite	Alkaline Cleaner	ALKAATUFF High Foam
Chrome Ore	Alkaline Cleaner	Alkaline Cleaner, Aqua Clean Tuff
Clay	Alkaline Cleaner	Alkaline Cleaner, Aqua Clean Tuff
Dolomite	Alkaline Cleaner	ALKAATUFF High Foam
Fluorspar - Calcium Fluoride, Fluorite	Alkaline non foaming cleaner	ALKAATUFF High Foam
Gypsum - Calsium Sulfate, Mineral White	Acidic Cleaner	Metal CLEAN Bright
Iron Ore Pellets	Acidic Cleaner	Metal CLEAN Bright
Lime Sand, Lime Stone, Calcium Carbonate	Acidic Cleaner	Metal CLEAN Bright
Magnesite Magnesium Carboante	Acidic Cleaner	Metal CLEAN Bright
Magnetite IRON BLACK	Alkaline Cleaner	ALKAATUFF High Foam
Magnese Ore	Alkaline Cleaner	ALKAATUFF High Foam
Zinc	Alkaline Cleaner	ALKAATUFF High Foam
Lead	Alkaline Cleaner	ALKAATUFF High Foam
Copper	Alkaline Cleaner	ALKAATUFF High Foam
Pyrite Iron Disulfide, Iron Pyrite, Pyrox	Alkaline Cleaner	ALKAATUFF High Foam
Phosphate Rock	Alkaline Cleaner	ALKAATUFF High Foam
Quartz, Silicone Dioxide, stone	Alkaline Cleaner	ALKAATUFF High Foam
Talk, Magnesium Talc, Soapstone	Alkaline Cleaner	ALKAATUFF High Foam
Vanadium Ore	Alkaline Cleaner	ALKAATUFF High Foam
Aluminum Dross	Alkaline non foaming cleaner	ALKAATUFF High Foam
Ferro Alloys	Acidic Cleaner	Metal CLEAN Bright
Granulated Slag	Acidic Cleaner	Metal CLEAN Bright
Hot Briquetted Iron HBI	Acidic Cleaner	Metal CLEAN Bright
Magnesite, Magnesium Oxide	Acidic Cleaner	Metal CLEAN Bright
Millscale Iron ORE	Acidic Cleaner	Metal CLEAN Bright
PIG IRON	Acidic Cleaner	Metal CLEAN Bright
Zinc Ashes	Alkaline foaming cleaner	ALKAATUFF High Foam
Zinc Dross	Alkaline foaming cleaner	ALKAATUFF High Foam
Zinc Residues	Alkaline foaming cleaner	ALKAATUFF High Foam
Brown Coal Briquettes, Lignite Brown Coal briquetties	Alkaline Cleaner	ALKAATUFF High Foam
Calcined Petroleum Coke	Alkaline Cleaner	ALKAATUFF High Foam
Coal, COKE, Petcoke - Petroleum coke	Alkaline Cleaner	ALKAATUFF High Foam
Castor Beans	Alkaline Cleaner	ALKAATUFF High Foam
Copra Dry	Alkaline Cleaner	ALKAATUFF High Foam
Fish Meal	Alkaline Cleaner	ALKAATUFF High Foam
Peat Moss	Alkaline Cleaner	ALKAATUFF High Foam
Seed Cake, Solvent Extracted	Alkaline Cleaner	ALKAATUFF High Foam
Soya Beans	Alkaline Cleaner	ALKAATUFF High Foam
Sunflower Seed	Alkaline Cleaner	ALKAATUFF High Foam
Wheat	Alkaline Cleaner	ALKAATUFF High Foam
CEMENT	Acidic Cleaner	Cement Remover, Metal clean Bright, Descaing
Cement Clinker	Acidic Cleaner	Cement Remover, Metal clean Bright, Descaing
Fly Ash	Alkaline Cleaner	ALKAATUFF High Foam

Packing & supply

Available pack sizes

20, 25, 50, 210, 1000 Ltr IBC TANK. We are keeping a full range of ship hold cleaning chemicals which include sodium hypochlorite, Muriatic, Metal clean bright, Cement remover, Coal remover, Pet coke stain remover, Hold Block Slip polymer Barrier coat, and many more. We are one of the largest suppliers of hold cleaning chemicals in India and the Middle East.

Supply locations

Aqua Clean Tuff supplier in Mumbai, Nhava Seva, Pirpav, Surat - Hazira, Kandla - Gandhidham, Sikka - Mundra, Manglore - Goa, Vizag - Visakhapatnam, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Paradip, Buj buj, Dubai - Sharjah, Fujairah Middle East, Sohar Barka Muscat Oman, Nairobi Kenya Africa

Marine & industrial chemicals, delivered worldwide.

Get in Touch

Learn More

Enquiries

Aqua Clean Tuff High Foam

Aqua Clean Tuff High Foam

Description

Application

Dosage & directions

Technical specification