Concentrate Heat Transfer Antifreeze Liq

Concentrate Heat Transfer Antifreeze Liq

Heat Transfer Liquid

Concentrated Heat Transfer Antifreeze Liquid Blended with corrosion Inhibitor propylene glycol for Closed Loop low temperature refrigeration systems

Usage unit
Ltr.
Quantity per unit
220
Part no. RXSOL-43-1436-220

Description

Concentrated Antifreeze liquid Propylene glycol inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer, in water-based, closed-loop heating and air-conditioning low temperature refrigeration systems systems. 

Application

Antifreeze for central heating installations and frozen water installations.

Dosage & directions

This Inhibited  Concentrate Heat Transfer Antifreeze Liq Propylene glycol heat transfer fluid has an operating temperature range of -50°F to 325°F; with fluid freeze protection to below -60°F, and system burst protection to below -100°F. 

Technical specification

Concentrate Heat Transfer Antifreeze Liq

Colour : Clear
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
Boiling point         : 104 oC
Viscosity     : 58.1 cp at 20 oC
Freezing Point : -22 oC
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 

Persistence and degradability Readily biodegradable.

Biodegradation 72 – 100 % 28 days

 

Notes

PROPYLENE GLYCOL based Concentrate Heat Transfer Antifreeze Liq supplier and exporter. Experts suggest in Airstack Chiller mixing of propylene glycol with water always be beneficial. Mixture in recirculating chillers is beneficial whenever the coolant temperature set point is below 10°C (48°F)
 
This fluid is specially formulated for HVAC systems to keep pipes free of corrosion without fouling.
 
 
This fluid is recommended for use in applications where low acute oral toxicity is important or where incidental contact with drinking water is possible.

Material safety data (MSDS)

Heading1 - RX Chemicals

Product Name Concentrate Heat Transfer Antifreeze Liq
Product Type   RXSOL-43-1436-220

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point ::: Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat, Canada

Phone +91 22 27815540/41
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail @ rxmarine.com

Heading2 - RX Chemicals

Chemical Name

CAS Number

EC Number

Propane-1,2-diol

57-55-6

200-338-0

Proprietory Corossion Inhibitor ..... .....
Methyl-1H-benzotriazole
CAS-No.: 29385-43-1
249-596-6

Glycol characteristic is to transfer heat from one place to other, due to that water-miscible glycol based coolant frequently used in heat transfer and cooling applications. Addition of Propylene Glycol in water enhances heat transfer parameters than water.
Heading3 - RX Chemicals

Hazard description: Not applicable.
Information concerning particular hazards for human and environment: Not applicable.

Heading4 - RX Chemicals

General information No special measures required.

After inhalation

Supply fresh air; consult the doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.

After swallowing

If symptoms persist consult the doctor.

Heading5 - RX Chemicals

Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.
Protective equipment: No special measures required.

Heading6 - RX Chemicals

Person-related safety precautions: Not required.
Measures for environmental protection:
Dilute with plenty of water. Do not allow to enter sewers/ surface or groundwater.
Measures for cleaning/collecting: Absorb with a liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Additional information: No dangerous substances are released.

Heading7 - RX Chemicals

Handling:
 Information for safe handling:
 Handling:
 Information for safe handling: No special requirement
 Information about fire - and explosion protection: No special measures required.
Storage:
 Requirements to be met by storerooms and receptacles: No special requirements.
 Information about storage in one common storage facility: Not required.
 Further information about storage conditions: None.
 Information about fire - and explosion protection: No special measures required.
Storage:
 Requirements to be met by storerooms and receptacles: No special requirements.
 Information about storage in one common storage facility: Not required.
 Further information about storage conditions: None.

Heading8 - RX Chemicals

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
57-55-6 propane-1,2-diol
WEEL (USA)
WEL (Great Britain)
10 mg/m³
474* 10** mg/m³, 150* ppm
*total vapour and particulates **particulates

Additional information: The lists valid during the making were used as the basis.
Personal protective equipment:
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests, no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material: The exact breakthrough time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Goggles recommended during refilling.

Heading9 - RX Chemicals

Colour : Clear
pH of solution : 6.5-8.5
Odour            : Characteristic
Solubility in water        : SOLUBLE COMPLETELY
Boiling point         : 104 oC
Melting point       : -13 oC
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Skin absorption/irritation       : YES

Persistence and degradability Readily biodegradable.

Biodegradation 72 – 100 % 28 days

Heading10 - RX Chemicals

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Heading11 - RX Chemicals

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Dermal

LD50

LD50

2000 mg/kg (rat)

20800 mg/kg (rabbit)

Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.
Additional toxicological information:
When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us. The substance is not subject to classification according to the latest version of the EU lists.

Heading12 - RX Chemicals

General notes: 
Persistence and degradability Readily biodegradable.

Biodegradation 72 – 100 % 28 days

Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Heading13 - RX Chemicals

Product:
Recommendation Smaller quantities can be disposed of with household waste.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

Heading14 - RX Chemicals

Land transport ADR/RID (cross-border)
ADR/RID class: -
Maritime transport IMDG:
IMDG Class: -
Marine pollutant: No
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: -

Heading15 - RX Chemicals

Labelling according to EU guidelines:
Observe the general safety regulations when handling chemicals.
The substance is not subject to classification according to EU lists and other sources of literature known to us.

Heading16 - RX Chemicals

This information is based on our present knowledge.However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Procedure

This Inhibited  Concentrate Heat Transfer Antifreeze Liq Propylene glycol heat transfer fluid has an operating temperature range of -50°F to 325°F; with fluid freeze protection to below -60°F, and system burst protection to below -100°F. 

Other names

FrioGel Neo

Packing & supply

Available pack sizes

5, 20, 25, 210 Ltr as well as 1000 Ltr IBC TANK. Best suitable specialized Glycol for HAVAC.

Supply locations

Heat Transfer Liquid PROPYLENE Glycol manufacturer and supplier in Mumbai, Gandhidham Kandla, Chennai, Kolkata Haldia, Visakhapatnam, Barka - Oman, Muscat, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Canada

Need Concentrate Heat Transfer Antifreeze Liq for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a quote