WORKSHOP CLEANER
Industrial Cleaner
RXSOL Workshop Cleaner water-soluble formulation particularly useful in marine engine rooms, ship maintenance workshops, automotive service centres, engineering workshops, machinery maintenance facilities and industrial plants.
- Usage unit
- Ltr.
- Quantity per unit
- 25
Description
RXSOL WORKSHOP CLEANER – MULTI-PURPOSE DEGREASER
Product Code: RXSOL-10-1006-020 Brand: RXSOL Product Category: Marine Cleaning & Maintenance / Industrial Degreasing Chemicals Product Type: Water-Based, Multi-Purpose Cleaning ConcentrateProduct Description
RXSOL Workshop Cleaner is a concentrated, water-based industrial cleaning and degreasing chemical designed to remove oil, grease, carbonaceous residues, soot, sludge and general dirt from machinery, tools, workshop floors and compatible industrial surfaces.
The formulation combines emulsifying agents, surfactants, dispersants and corrosion-inhibiting components to provide effective cleaning performance across a wide range of marine and industrial maintenance applications.
RXSOL Workshop Cleaner is particularly useful in marine engine rooms, ship maintenance workshops, automotive service centres, engineering workshops, machinery maintenance facilities and industrial plants.
Its water-soluble formulation allows dilution according to the severity of contamination and the cleaning method.
The RXSOL catalogue identifies this product under code RXSOL-10-1006-020 and associates it with IMPA 551002 and multi-purpose workshop cleaning applications.
Work Shop Cleaner cum Degreaser RXSOL-10-1006-020 Mixture of Emulsifier, new technology surfactants With high solvency and emulsification effect, Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas . Acts as superior quality cleaner / degreaser. BIO DEGRADABLE.
Application
Major Applications
|
Application |
Cleaning Purpose |
|---|---|
|
Marine Engine Rooms |
Removal of oil, grease and machinery contamination |
|
Engineering Workshops |
Cleaning tools, equipment and work surfaces |
|
Machinery & Engine Parts |
Removal of lubricating oil and oily deposits |
|
Workshop Floors |
Removal of grease, dirt and general industrial soils |
|
Automotive Workshops |
Cleaning service areas and suitable vehicle components |
|
Ship Deck Equipment |
Cleaning oily deposits from compatible surfaces |
|
Industrial Machinery |
Removal of accumulated grease and grime |
|
Metal Components |
Cleaning before inspection or maintenance |
|
Maintenance Facilities |
Routine industrial housekeeping |
Workshop cleaner is bio degradable eco friendly Solvent free cleaning chemicals, specialized for cleaning of automibile vechicle, workshops, machinery and accessory parts.
Work shop cleaner is suitable to use by hand spray manually or through high-pressure machine.
Chemically it is formulated to dissolving grease and carbonecious materials. As this product is free from any solvent and non corrosive materials so does not attack paints, rubber or plastics.
Dosage & directions
Recommended Dilution
|
Cleaning Application |
Suggested Concentration |
|---|---|
|
Light General Cleaning |
2–3% |
|
Routine Workshop Cleaning |
3–5% |
|
Heavy Oil & Grease Cleaning |
5–10% |
|
Heavily Contaminated Components |
10–25% |
|
High-Pressure Cleaning Machines |
3–5% |
|
Floor Cleaning Machines |
3–10% |
Directions for Use
Manual Cleaning
-
Remove loose dirt and excessive oil.
-
Prepare the required cleaning solution with water.
-
Apply using a brush, sponge or suitable spray equipment.
-
Allow approximately 5–15 minutes of contact time, subject to surface compatibility.
-
Agitate stubborn deposits with a suitable brush.
-
Rinse thoroughly with clean water.
-
Dry metal components where necessary to prevent flash rusting.
High-Pressure Cleaning
Prepare a suitable dilution, apply using compatible pressure-washing equipment and rinse thoroughly. Avoid spraying electrical components and sensitive machinery.
Immersion Cleaning
For compatible dismantled components, immerse in the prepared solution and allow sufficient cleaning time. Brush where necessary, rinse and dry.
Depending upon contamination ( type of system, amount of soil and equipment operating conditions ) 2-25% with fresh water.
It is a powerful degreaser concentrate developed for extremely tough jobs. Ideal for cleaning machinery, engines, factory floors, tools, trucks and metal parts. Heavy Duty Degreaser quickly penetrates grease, oil and a variety of soils. It is a multi-purpose decarbonizer cum degreaser and is safe for items made of stainless steel, copper, copper-nickel, cast iron, galvanized surfaces etc.
Feature : its HIGH wetting effect, cleans carbon deposits, soot, soil deposits
Typical Dosage:
| Normal Cleaning |
Spray Method 0.03-0.5% |
Wip Method 0.05-0.7 % |
||
| Heavy Duty Cleaning | 0.0 5-0.5% | 0.05-0.7% | ||
| Machine Application |
High-pressure cleaning Machine Concentration 3-5% |
Floor cleaning machines: Concentration 3–10%. | ||
| Product Propreties | Characteristics : | |||
| Appearance | Compatible with oily water separators. | |||
| Odour / Solubility | Releasing the oil phase for reclamation. Suitable for all types of floors. Deodorizing nature | |||
| Multiple Utility | Eliminates the need to buy & stock duplicate products because of its effectiveness. | |||
| Economical | An economic highly concentrated product. | |||
| Compatibility Metal Rubber | Water based , Biodegradable .Safe to rubber and metal gasket | |||
| pH Neat | 9 - 10 | RXSOL-10-1006-020 | Size In Ltr.5,20,25,50 | |
Technical specification
Technical Properties
|
Property |
Published / Typical Description |
|---|---|
|
Product Name |
Workshop Cleaner |
|
Product Code |
RXSOL-10-1006-020 |
|
Appearance |
Liquid; exact colour to be confirmed |
|
Chemical Nature |
Surfactant and emulsifier-based cleaner |
|
Solubility |
Completely soluble in water |
|
pH (Neat) |
Approximately 9–10, according to one published specification |
|
Primary Function |
Cleaning and degreasing |
|
Cleaning Action |
Emulsification, wetting and dispersion |
|
Application Method |
Spray, brush, wiping or machine cleaning |
|
Packing |
5, 20, 25, 50 and 210 L options |
The published product information contains inconsistent pH figures, including 9–10 and 12. The correct value should be confirmed from the latest batch COA before issuing a formal specification.
Dosage:
| Nature Of Residue Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines) |
DIRECT INJECTION 0.03-0.5% |
CIRCULATION 0.05-0.7 % |
||
| ORGANIC MATERIAL (HYDROCARBON ) | 0.0 5-0.5% | 0.05-0.7% | ||
| Product Propreties | Characteristics : | |||
| Appearance | Compatible with oily water separators. | |||
| Odour / Solubility | Releasing the oil phase for reclamation. Suitable for all types of floors. Deodorizing nature | |||
| Density | Eliminates the need to buy & stock duplicate products because of its effectiveness. | |||
| Compatibility | An economic highly concentrated product. | |||
| Metal Rubber | Also used for gas and hydrocarbon freeing of tanks.Free from caustic & hydrcarbon,Non flammableWater based , Biodegradable .Safe to metal | |||
| pH Neat | 12 | RXSOL-10-1006-020 SB- Packaging | Size In Ltr.20,35,210 | |
RXSOL-10-1006-020 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces
Handling & precautions
Fields: RXSOL-10-1006-020 containing corrosion inhibitors to prevents the corrosion of metals such as Aluminium, Copper,Brass and Tin.RXSOL-10-1006-020 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing.may be applied by brush,handspray or used in ultrasonic cleaning tanks,immersion soak tanks and high and low pressure spray appliances.May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.
Tank Cleaning (Cargo tank cleaning after mineral, animal, vegetable and fish oil.)
Method of Application and Doses: 1st of all by stripping suction removes all possible oil (greasy materials)To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray /Direct injection) recirculate the system with RXSOL-10-1006-020 Solution.
1.Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%
2.Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%).
3.Spot cleaning. Hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before washing. off
Notes
Use undiluted for heavily soiled components. It is a unique product for easily removing deposits of ash and carbon from the combustion chambers of diesel engines.
Completely Soluble in Water .
RXSOL-10-1006-020 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces
Key Features & Benefits
-
Effective removal of oil, grease, dirt and workshop contamination.
-
Water-based concentrated cleaning formulation.
-
Contains surfactants and emulsifying agents for degreasing.
-
Helps loosen soot and carbonaceous deposits.
-
Suitable for manual and mechanical cleaning.
-
Can be applied by brush, spray or high-pressure cleaning equipment.
-
Useful for machinery, tools, workshop floors and engine room surfaces.
-
Contains corrosion-inhibiting components according to the published formulation description.
-
Reduces the need to maintain multiple general-purpose cleaning products.
-
Suitable for marine and industrial maintenance operations.
Material safety data (MSDS)
| Product Name | RXSOL-10-1006-020 |
| Product Type | Workshop Industrial cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat, Nairobi
| Phone | +91 22 27815540-43 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 123 @ rxmarine.com |
High Molecular SURFACTANT ( ANIONIC & NON-IONIC ), LAB derivative Sodium hydroxide Strong alkaline cleaner Declaration according
recommendation 89/542/EEG..
|
Environmental Hazards |
None |
|
Human Health Hazards |
Moderates |
R 35:Causes skin burning effects
|
Inhalatin |
Move to fresh air and seek medical advice attention. |
|
Skin Contact |
Rinse with running water and soap. Skin care. Remove contaminated clothes. |
|
Eye Contact |
Flush with running water for at least 15 minutes Immediately . |
|
Ingestion |
Vomiting is dangerous , seek medical attention. |
Non Combustible Porduct
|
Suitable |
N.A. can use foam dry Co2 , water-spray. |
|
Not suitable |
Not applicable |
|
Special |
Not applicable |
|
Protection of fire Fighter |
Not applicable |
Special protective equipment for fire-fighters: Wear protective equipment.
|
Enviromentel Precaution |
Direct flow into drainage system, surface or ground water is prohibited. |
|
Cleaning Method |
Flush Spill Area with Water and remove with liquid-absorbing material like foam sand,sawdust etc.. |
|
Condition to Avoid |
Non flammable but avoid direct heating |
|
Materials to Avoid |
Do not subject to Acidic / Oxidizing Agents |
|
Handling |
Keep Container Tightly Closed |
Note:Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)
Personal protection :
|
Respiratory System Protection |
Approved respirator must be worn when spraying |
|
Eye Protection |
Cear eye protection (on possibility of contact ) |
|
Hand protection |
Cear PVC chemical resistance protective glove |
Product Properties:
|
Appearance |
Slight Yellow - clear liquid |
|
Density |
In g/cm3 at 20°C: 1.21 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH |
Alkaline ( 13 ) |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
|
Packaging |
Size (in Litres) 25, 220 Ltrs |
|
Hazardous Decomposition Products |
Do not occur if stored and used as directed. n FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced |
NOTE : Avoid Contact With Acid
Comment - Not applicable , 100% Soluble in water
95 % added surfactants are biodegradable as per by international regulation .This material must be disposed with local national regulations.
As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.
| Proper Shipping Name | ||||
| UN | ||||
| Proper Shipping Name |
Alkaline Solution |
|||
| UNNo. | 1824 | |||
| Hazard Class | 8 | PackingGroup | II | |
| Road/Rail(ADR/RID) | ||||
| Proper Shipping Name |
Alkaline solution |
|||
| ADR UN No. | 1824 | |||
| ADR Hazard Class | 8 | Tremcard |
80S1824 |
|
|
Sea(IMDG) |
||||
| Proper Shipping Name |
Alkaline solution |
|||
| IMDG UN No. | 1824 | |||
| IMDG Hazard Class. | 8 | IMDG Pack Group. | II | |
| IMDG EmS | F-A, S-A | IMDG subrisk |
N/A |
|
| IMDG Labels |
8 |
IMDG Flash point |
N/A |
|
|
Air(ICAO/IATA) |
||||
| Proper Shipping Name |
Alkaline solution |
|||
| ICAO Un No. | 1824 | |||
| ICAO Hazard Class | 8 | ICAO Packing Group. | II | |
| ICAO subrisk |
N/A |
ICAO Labels |
8, CAO |
|
| ICAO Flashpoint | N/A | |||
|
DOT/ CFR (US Department of Transportation) |
||||
| DOT Proper Shipping Name |
Alkaline solution |
|||
| Hazardous Material |
Sodium hydroxide |
|||
| Hazard Class | 8 | Identification Number | UN 1824 | |
| Product RQ (lbs) | 3640 | DOT subrisk | N/A | |
| DOT Labels | 8 | DOTFlashpoint |
N/A |
|
Classification and labelling according to Chemicals Hazard Information and Packaging Regulations (CHIP). Symbols of danger :- C Corrosive
|
R phrases |
R 35 : Causes severe burns |
|
S-phrases |
S2: Keep out of reach of children S26 :In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 : After contact with skin, wash immediately with plenty of water. S37/39 : Wear suitable gloves and eye/face protection. |
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our product from the point of view of safety requirements and is not intended to guarantee any particular properties
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Procedure
Recommended Dilution
|
Cleaning Application |
Suggested Concentration |
|---|---|
|
Light General Cleaning |
2–3% |
|
Routine Workshop Cleaning |
3–5% |
|
Heavy Oil & Grease Cleaning |
5–10% |
|
Heavily Contaminated Components |
10–25% |
|
High-Pressure Cleaning Machines |
3–5% |
|
Floor Cleaning Machines |
3–10% |
Directions for Use
Manual Cleaning
-
Remove loose dirt and excessive oil.
-
Prepare the required cleaning solution with water.
-
Apply using a brush, sponge or suitable spray equipment.
-
Allow approximately 5–15 minutes of contact time, subject to surface compatibility.
-
Agitate stubborn deposits with a suitable brush.
-
Rinse thoroughly with clean water.
-
Dry metal components where necessary to prevent flash rusting.
High-Pressure Cleaning
Prepare a suitable dilution, apply using compatible pressure-washing equipment and rinse thoroughly. Avoid spraying electrical components and sensitive machinery.
Immersion Cleaning
For compatible dismantled components, immerse in the prepared solution and allow sufficient cleaning time. Brush where necessary, rinse and dry.
Depending upon contamination ( type of system, amount of soil and equipment operating conditions ) 2-25% with fresh water.
It is a powerful degreaser concentrate developed for extremely tough jobs. Ideal for cleaning machinery, engines, factory floors, tools, trucks and metal parts. Heavy Duty Degreaser quickly penetrates grease, oil and a variety of soils. It is a multi-purpose decarbonizer cum degreaser and is safe for items made of stainless steel, copper, copper-nickel, cast iron, galvanized surfaces etc.
Feature : its HIGH wetting effect, cleans carbon deposits, soot, soil deposits
Typical Dosage:
| Normal Cleaning |
Spray Method 0.03-0.5% |
Wip Method 0.05-0.7 % |
||
| Heavy Duty Cleaning | 0.0 5-0.5% | 0.05-0.7% | ||
| Machine Application |
High-pressure cleaning Machine Concentration 3-5% |
Floor cleaning machines: Concentration 3–10%. | ||
| Product Propreties | Characteristics : | |||
| Appearance | Compatible with oily water separators. | |||
| Odour / Solubility | Releasing the oil phase for reclamation. Suitable for all types of floors. Deodorizing nature | |||
| Multiple Utility | Eliminates the need to buy & stock duplicate products because of its effectiveness. | |||
| Economical | An economic highly concentrated product. | |||
| Compatibility Metal Rubber | Water based , Biodegradable .Safe to rubber and metal gasket | |||
| pH Neat | 9 - 10 | RXSOL-10-1006-020 | Size In Ltr.5,20,25,50 | |
Useful area
IMPA 551002, Deck Cleaner Degreaser Multi Purpose Water Soluble, Weicon Workshop Cleaner, P3 Glin Plus 25 Ltr pack
Industrial area
#workshopCLEANER_UAE
#WORKshop_CLEANER
#WORKSHOPcleaner_muscatOMAN
Tag identification
Work Shop Cleaner is a unique formulation blended from inorganic, organic compounds and detrgents with powerful dispersing agents. Readily soluble in water in all proportions. It is non - corrosive to metal like copper, aluminium, mild steel, and plastic. It is no - toxic which makes handling easy.
Other names
IMPA 551002, Deck Cleaner Degreaser Multi Purpose Water Soluble, Weicon Workshop Cleaner, P3 Glin Plus 25 Ltr pack
Keywords
Multi Purpose Water Soluble, Weicon Workshop Cleaner
Packing & supply
Available pack sizes
5, 20, 25 ltr., 50, 210 ltr. Workshop cleaner is bio degradable eco friendly Solvent free cleaning chemicals, specialized for cleaning of automibile vechicle, workshops, machinery and accessory parts.
Supply locations
Cleaning Mechanism Emulsification: Helps disperse oily contamination into the cleaning solution. Wetting: Improves contact with dirt and grease deposits. Dispersion: Helps suspend loosened particles and prevent immediate redeposition. Corrosion Control: The published formulation includes corrosion-inhibiting components intended to help protect compatible metal surfaces during cleaning. Material Compatibility Suitable applications may include compatible: Carbon steel Stainless steel Cast iron Copper and brass Painted industrial surfaces Rubber and plastic components Workshop floor coatings Compatibility must be checked before use, particularly on aluminium, galvanized steel, sensitive plastics, rubber seals and decorative coatings. Safety & Handling Read the current Safety Data Sheet before use. Wear suitable gloves and eye protection. Avoid prolonged skin contact. Do not inhale cleaning spray or mist. Avoid mixing with acids, oxidizers or other concentrated chemicals. Use adequate ventilation. Prevent uncontrolled discharge of oily wash water. Collect and dispose of contaminated cleaning solutions appropriately. Although the product is marketed as water-based and solvent-free, these descriptions do not establish that the finished formulation is non-hazardous or universally safe for all materials. Storage & Packing Store in tightly closed containers in a cool, dry and ventilated area. Available published packing sizes: 5 L, 20 L, 25 L, 50 L and 210 L. Shelf life should be confirmed from the current product specification. Workshop Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Workshop Cleaner at a competitive price from us. We have ready stock of Workshop Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Need WORKSHOP CLEANER for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a quote