ECO Chlor Biological Guard Antifouling

Ballast Tank Chem-23

ECO Chlor Biological Guard Antifouling

Part No. RXSOL-23-4003-220

Sea Water MICROORGANISM GROWTH controller

ECO Chlor Biological Guard Antifouling for Ballast Water Treatment to use low dose of chlorine dioxide (ClO2) solution. RXSOL-23-4003-220 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth s

Key details

Part number RXSOL-23-4003-220
Generic name Sea Water MICROORGANISM GROWTH controller
Supply locations Bio Antifouling Guard marine growth controller for COOLING WATER TREATEMENT chemical manufacturer and supplier in Mumbai, Kandla, Gandhidham, Mundra, Surat Hazira, Chennai Ennore, Visakhapatnam Gangavara, Kakinada, Kolkata, Haldia Paradip, Ajman, Abudhabi, Dubai, Sharjah, Fujairah, UAE, Ruwi Gala Barka, Muscat Oman, Nairobi, Yemen, Sudan, Kenya, Canada
Usage unit Ltr.
Quantity per unit 210

Need this product at your port or plant?

Enquire Now

ECO Chlor Biological Guard Antifouling for Ballast Water Treatment to use low dose of chlorine dioxide (ClO2) solution. RXSOL-23-4003-220 (Fouling Preventing Liquid ) is a very effective clear , yellowish green with , anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water Ballast systems.

It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of microorganism bacteria , fungi , larvae etc.. ( EXISTING GROWTH  CAN BE CLEAN BY USING RXSOL-11-1008--DC / RXSOL-54-1008-SA  ) 

The best POINT of feeding is as early as possible in the system , preferably at the suction point of strainer , this will helps dispersion of solution in all parts of the sewater cooling system.
 

# Effectively control  MICROORGANISM GROWTH
# Economical , Reduce down time cost , also doesn't require  any special monitoring
# Also control Biological corrosion

1 . Avoid to use in any food area / food crop ( FARMING PURPOSE ).
2 . It is strongly recommended to clean entire fouled contaminated system prior to its use . 
3.  IT SHOULD ONLY BE DILUTED WITH FRESH WATER .
4. Causes 
eye and skin irritation, WORKERS must wear all chemical resistant apron and face mask , long pants , shoes. Strictly avoid contamination  of food items.

For Ballast Water systems



Dose 150 – 500 ML of  RXSOL-23-4003-220   for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally  the treatment is not required when sailing deep sea .



For  ballast tanks

Dose 1 litre of 
RXSOL-23-4003-220 per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons.



For Trim Tanks, Oil Rig Sea Legs and Similar Systems



Dose 25 litres of 
RXSOL-23-4003-220 per 100 tons of water  . GENERAL Testing for bacteria can be done with our RXSOL DIP SLIDE METHODS ( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination.

#BioAntifoulingGuardMarineGrowthController_Supplier
#BioAntifoulingGuardMarineGrowthController_Manufacturer
#BioAntifoulingGuardMarineGrowthController_India
#BioAntifoulingGuardMarineGrowthController_Dubai
#BioAntifoulingGuardMarineGrowthController_Muscat

BALLAST WATER TREATMENT Biological Guard Antifouling, Antifouling Care Treat Seawater Chemical, Microbiological Control Agent, ECOCHLOR BLUE 220 Ltr

Need ECO Chlor Biological Guard Antifouling for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a Quote