SuperFoam Drilling Foam Liquid
Part No. RXSOL-81-8206-025
Drilling Foam Extra
RXSOL DRILLING FOAM RX is a proprietary mixture of biodegradable surfactants and foam stabilizers which is designed to produce high performance foam using fresh, brackish and sea water for various drilling operations.
Key details
| Part number | RXSOL-81-8206-025 |
|---|---|
| Generic name | Drilling Foam Extra |
| Available pack sizes | Drilling Foam RXSOL available in 25 Ltr, 50 Ltr, 210 Ltrs and 1000 Ltrs IBC TANK |
| Supply locations | Drilling Foam RXSOL manufacturer and supplier in India UAE Middle East Oman Nairobi, Mumbai, Kolkata, Chennai, Visakhapatnam, Kakinada, Hazira Surat, Gandhidham Surat Gujrat, Vizag, Muscat, Sohar, Barka, Sudan, Yemen, Fujairah, Dubai, Abudhabi, Sharjah, West Bengal |
| Usage unit | Ltr. |
| Quantity per unit | 25 |
Need this product at your port or plant?
Enquire NowSUPERFOAM DRILLING FOAM RXSOL is a biodegradable mixture of surfactants and foam stabilizer which has been formulated as a foaming agent fresh, brackish and sea water for various drilling operations.
Foam PLUS is an upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.
SUPERFOAM DRILLING FOAM RXSOL may be used in a variety of drilling operations. Oil Well Drilling, ranging from simple air drilling to stiff foam drilling where the foam is reinforced by the use of polymers.
Superfoam Drilling foam FOAM PLUS is a upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.
DRILLING FOAM RXSOL concentration may vary depending on the specific drilling system and equipment used. However for air drilling, drill foam can be used as an effective dust suppressant, at 0.1 - 0.2% by volume in injection water. For normal drilling condition, foam can be used as 0.5-1% by volume in injection water.
DRILLING FOAM RXSOL can be mixed in water tank and introduced into the airstream. A foam injection pump with nozzle can be used. The foam drill concentration may vary depending on the specific drilling system and equipment used. Use water as clean as possible to mix to prevent fines and dirt from damaging or blocking suction-line filters of the small parts and passages of the foam pump.
SuperFoam Drilling Foam for Oil and Gas Recommended Treatment:
Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
- Air drilling: 0.1-0.2%
- Mist Drilling: 1.0%-2.0%
- Stiff foam drilling: Mix Drilling Foam, 0.1-0.2% as foam stabilizer or 0.2-0.4%, Drilling Foam Foam Plus 1.0-1.5%
| Parameter | Test Method | Unit | Result |
| pH @ 25°C (1% Solution) | METS IP 81 | – | 7.36 |
| Determination of Biodegradability | METS IP-80 | % | 90.37 |
| Specific Gravity @ 25°C | Measurement | – | 1.0467 |
| Solubility | Visual/Gravimetric | – | Soluble |
| Viscosity @ 20°C (Spindle-2, Speed-60 rpm, Torque-74%) | Viscometer | cP | 603 |
| Non-Volatile Content | Gravimetry | % | 10.77 |
| Foam Generation (1% Solution with Fresh Water) | Gravimetry/Volumetry | mL | 530 |
| Foam Stability (1% Solution with Fresh Water) | Gravimetry/Volumetry | Sec | 205 |
| Salt Tolerance (1% Solution with 5% NaCl) - Foam Generation | Gravimetry/Volumetry | mL | 360 |
| Salt Tolerance (1% Solution with 5% NaCl) - Foam Stability | Gravimetry/Volumetry | Sec | 212 |
| Thermal Stability - Foam Generation | Gravimetry/Volumetry | mL | 510 |
| Thermal Stability - Foam Stability | Gravimetry/Volumetry | Sec | 170 |
Heavy Metal Test Report of Superfoam Drilling Foam Liquid
| Parameter | Test Method | Unit | Result |
| Lead (Pb) | METS IP 76 | ppm | ND |
| Arsenic (As) | METS IP 76 | ppm | ND |
| Cadmium (Cd) | METS IP 76 | ppm | ND |
| Mercury (Hg) | METS IP 76 | ppm | ND |
| Antimony (Sb) | METS IP 76 | ppm | ND |
ND: Not Detected
Advantages of Drilling Foam:
- Environmentally friendly and biodegradable, it does not pollute
- Generates instant high foam quality of exceptional stability
- Economical, produces stable foam at low concentrations
- Compatible with all types of makeup water including brackish, salty and hard water
- Improves hole cleaning and increases penetration rates
Features & Benefits :::
- It is fluorine free, non-toxic & biodegradable foam and hence environment friendly and poses no threat to workers and environment.
- Lubricates and cools the drill bit improves the hole cleaning
- Effectively carries cutting to surface and hence enhance the rate of cutting removal
- Reduces borehole erosion when drilling poorly consolidated formations
- Improves hole cleaning and increases penetration rates
- Effective in dust suppression during air drilling operation
- Reduces air requirements
- Reduces the tendency of softer clays to stick together
Handling and Storage ::
DRILLING FOAM RXSOL should be stored in the original supplied package for getting a long shelf life. It can also be stored in stainless steel containers. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, thawing with gentle remixing will render the product completely usable.
| Product Name | : Superfoam Drilling Foam Liquid |
| Part Number | : RXSOL-81-8206-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, JNPT, Chennai, Vizag, Kolkata, UAE, and OMAN
| Phone | +91 22 20871200 - 20871500 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| 123 @ rxmarine.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | Wt.% |
| Solvent | 34590-94-8 | 20 - 50% |
| Hydrocarbon surfactant | Proprietory Mixture | 10 - 30% |
| Stabilizer | 102-71-6 | 10 - 30% |
| DI Water | 7732-18-5 | 10 - 30 % |
| Signal Word | None |
| Hazard Statements |
Causes skin irritation. Causes serious eye irritation |
| Precautionary statements - prevention | Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. |
| Precautionary statements - response |
IF ON SKIN: Wash with plenty of water and soap. Specific treatment (see First AID Section on this label). If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. If eye irritation persists get medical advice/attention. |
| Eye Contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately. |
| Skin Contact | Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately. |
| Inhalation: | If inhaled, If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician. |
| Ingestion: | If swallowed, do not induce vomiting. Allow victim to rinse his mouth and then to drink 2-4 cupfuls of water. Never give anything by mouth to an unconscious person. Call a physician. |
| Notes to Physicians | Treat symptomatically. |
| Suitable extinguishing media | Material is itself a fire extinguishing agent. |
| Protective Equipment | Use personal protective equipment. |
| Flammability | Non-flammable. Contains water as component. |
| Hazardous combustionproducts | NA |
| Advice for firefighters | Wear self-contained breathing apparatus. Wear full protective equipment. |
| Specific extinguishing methods | NA |
| Enviromental Precaution | Do not allow contact with soil, surface or ground water.If the products get into drains, inform the relevant authorities immediately. |
|
Methods and materials for containment and cleaning up |
Stop leak. Use appropriate protective equipment during cleanup. Collect spilled concentrates. Rinse the affected area with plenty of water until it no longer foams. Care should be taken to avoid slip hazard. Disposal should be made in accordance with federal, state and local regulations. |
| Advice on safe handling | Avoid getting chemicals on you or in you. Wash hands after handling chemicals. Don't eat or drink while handling chemicals. |
| Storage | NO Special conditions are required for safe storage. Store in original container. As much as possible keep from being washed into surface water. |
| Advice on general occupational hygiene | Wash hands after use. Do not to eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. |
| Engineering Control | Normal |
| Personal Protection |
Eye protection : Wear eye protection/ face protection. Hand protection : Wear the following personal protective equipment: Standard glove type. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Skin protection : Personal protective equipment comprising: suitable protective gloves, safety goggles and protective clothing Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. |
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Remove and wash contaminated clothing before re-use. Wash face, hands and any exposed skin thoroughly after handling. Provide suitable facilities for quick drenching or flushing of the eyes and body in case of contact or splash hazard. |
Gloves Suit
| Physical State | Liquid |
| Colour | Amber |
| Odour | Characteristic |
| Boiling point and boiling range | 100°C (Initial) |
| Flash Point | Non Flammable |
| Freezing Point | - 5°C |
| pH | 6.5-9.5 at 20°C |
| Evaporation rate | No data available |
| Flammability (solid, gas) | No data available |
| Upper explosion limit | No data available |
| Lower explosion limit | No data available |
| Explosive properties | No data available |
| Vapor pressure | No data available |
| Relative vapor density | No data available |
| Specific Gravity | 1.00-1.03 at 201°C |
| Water solubility | Soluble |
| Solubility in other solvents | No data available |
| Partition coefficient: octanol | No data available |
| Autoignition temperature | No data available |
| Thermal decomposition | No data available |
| Viscosity, kinematic | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Molecular weight | No data available |
| VOC | No data available |
| Recativity | None |
| Stability | Stable under normal conditions. |
| Possibility of hazardous reactions | No dangerous reaction known under conditions of normal use. |
| Incompatible materials | Avoid use of product on burning metals, electrically energized equipment and contact with water reactive material |
| Hazardous Decomposition | Not Known |
| Condition to Avoid | None Known |
| Polymerization | Will not occur. |
| Route of Exposure | Inhalation, Eye contact, Skin contact |
| Eyes |
Causes eye Irritation |
| Skin | Causes skin Irritation. |
| Permissible Exposure Limit, LD50 | >8 gm/Kg body wt. of rat (oral) |
| Acute inhalation toxicity | No data available |
| Acute dermal toxicity | No data available |
| Environmental Effects | No data available |
| Toxicity to fish | No data available |
| Toxicity to daphnia and others | No data available |
| Toxicity to algae | No data available |
| Biodegradability | This product is an ecologically inert material. It does not contain ozone depleting substances and is not expected to exert an eco-toxic effect or bio-accumulated in the food chain |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Remarks | Please consider the relevant national or regional provisions. Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities. |
| Waste Disposal | Prevent discharge foam/foam solution to waterways without treatment. Waste disposal should be made in accordance with central, state and local regulations. Waste may be incinerated or disposed of by treatment at a permitted facility only with permission or as advised by competitive authority |
Hazard Pictograms:
| UN Number | NA |
| Proper shipping name | Not classified as Hazardous Product |
| Transport hazard class(es) 8 | |
| ADR/RID | NA |
| Subsidiary risk IMDG | NA |
| Subsidiary risk IATA | NA |
| Packing group | |
| Packing group | NA |
| Environmental hazards | |
| Environmental hazards | No |
| Marine pollutant | No |
| ADR/RID | |
| Hazard ID | NA |
| Tunnel Category | NA |
| IMDG | |
| EmS Code | NA |
| IATA | |
| Packing Instruction (Cargo) | NA |
| Maximum quantity | NA |
| Packing Instruction (Passenger) | NA |
| Maximum quantity | NA |
| Regulations | NA |
| Chemical safety assessment | No data available. |
| Further information |
FOR INDUSTRIAL USE. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
DRILLING FOAM RXSOL concentration may vary depending on the specific drilling system and equipment used. However for air drilling, drill foam can be used as an effective dust suppressant, at 0.1 - 0.2% by volume in injection water. For normal drilling condition, foam can be used as 0.5-1% by volume in injection water.
DRILLING FOAM RXSOL can be mixed in water tank and introduced into the airstream. A foam injection pump with nozzle can be used. The foam drill concentration may vary depending on the specific drilling system and equipment used. Use water as clean as possible to mix to prevent fines and dirt from damaging or blocking suction-line filters of the small parts and passages of the foam pump.
SuperFoam Drilling Foam for Oil and Gas Recommended Treatment:
Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
- Air drilling: 0.1-0.2%
- Mist Drilling: 1.0%-2.0%
- Stiff foam drilling: Mix Drilling Foam, 0.1-0.2% as foam stabilizer or 0.2-0.4%, Drilling Foam Foam Plus 1.0-1.5%
How is RXSOL Superfoam Drilling Foam liquid saving you money in water well drilling operations?
SUPERFOAM Drilling Foam Liquid is a very concentrated product with high foam generation capability in small concentrations such as 0.5% and 1%. Apart from the excellent foam generation quality, the stability of the foam in fresh water as well as saline water (salty water) is very high as can be seen in the Technical Properties reports.
Find below table showing meaning of each parametyer of SUPERFOAM Drilling Foam Liquid:
| Parameter | Your Result | Industry Assessment | Rating |
|---|---|---|---|
| pH (1%) | 7.36 | Neutral, ideal | Excellent |
| Biodegradability | 90.37% | Very environmentally friendly | Excellent |
| Specific Gravity | 1.0467 | Typical for concentrated liquid foam | Very Good |
| Solubility | Soluble | Required | Excellent |
| Viscosity | 603 cP | Easy pumping with good concentrate stability | Very Good |
| Fresh Water Foam Height | 530 ml | Very high | Excellent |
| Fresh Water Foam Stability | 205 sec | Very good | Excellent |
| Salt Water Foam Height | 360 ml | Good salt tolerance | Good |
| Salt Water Stability | 212 sec | Excellent | Excellent |
| Thermal Foam Height | 510 ml | Excellent | Excellent |
| Thermal Stability | 170 sec | Good | Very Good |
#drillingfoam_manufacturer
#drillingFOAM_supplier
#DRILLINGfoam_muscatOMAN
#drillingfoam_dubaiUAE
#DRILLINGFOAMmanufacturerinUAE
#DRILLINGFOAMLIQUIDmanufacturerinGCC
#DRILLINGFOAMLIQUIDinSaudiArabia
Key Features of using RXSOL SUPERFOAM DRILLING FOAM:
- Biodegradable Formulation - Environmentally friendly blend of advanced surfactants with low environmental impact.
- Superior Foam Stability - Produces dense and long-lasting foam for enhanced cuttings transport and borehole cleaning.
- Multi-Water Compatibility - Effective in fresh water, brackish water, and seawater drilling environments.
- Highly Concentrated Formula - Economical dosage with excellent performance for oil & gas, mining, and water well drilling applications.
Extra Superfoam Drilling Foam
SUPERFOAM DRILLING FOAM RXSOL is a high-performance, biodegradable foaming agent formulated with premium surfactants and foam stabilizers for drilling applications in fresh, brackish, and seawater systems. It generates stable, dense foam with excellent carrying capacity for efficient cuttings removal. The concentrated formulation provides superior foam stability under varying geological and water conditions. It is widely used in oil & gas, mineral exploration, geothermal, and water well drilling operations.
Need SuperFoam Drilling Foam Liquid for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote