Products

Browse 7,000+ industrial, marine, oilfield, water-treatment and laboratory chemicals — each with a part number and MSDS on request. Search by product name, part number or alias, or pick a category.

MOLYCLEAN MA 03 PHOSPHATE FREE Phosphate-NMT 0.002%

MOLYCLEAN MA 03 PHOSPHATE FREE Phosphate-NMT 0.002%

Part No. RXSOL-60-6605-004
General purpose reagents used in many potential applications in chemical laboratories. ... MOLYCLEAN MA 03 PHOSPHATE FREE (Phosphate-NMT 0.002%).

MOLYCLEAN MA 02 NEUTRAL pH Value- 6-8

Part No. RXSOL-60-6605-003

MOLYCLEAN MA 01 ALKALINE pH Value- 11-12

Part No. RXSOL-60-6605-002
Although alkalinity is primarily a term used by oceanographers, it is also used by hydrologists to describe temporary hardness. Moreover, measuring alkalinity is important in determining a stream's ability to neutralize acidic pollution fro…

MOLYBDIC ACID LR

Part No. RXSOL-60-6605-001
Molybdic Acid is the hydrated forms of molybdenum trioxide. It is used for the determination of phosphorus or phosphate and lead. It is also used in glazes for ceramics, in manufacturing of Rock Phosphate based Fertilizers, Pigments, Dyes…

MOLYBDIC ACID AR

Part No. RXSOL-60-6604-999
Molybdic acid refers to hydrated forms of molybdenum trioxide and related species. The monohydrate (MoO3·H2O) and the dihydrate (MoO3·2H2O) are well characterized. They are yellow diamagnetic solids.

MOLYBDENUM TRIOXIDE LR

Part No. RXSOL-60-6604-998
Technically pure molybdenum trioxide, the product from the roasting of molybdenum disulfide, is an additive to steel and corrosion-resistant alloys. Chemically pure molybdenum trioxide is used to manufacture molybdenum metal.

MOLYBDENUM TRIOXIDE AR

Part No. RXSOL-60-6604-997
Molybdenum occurs naturally in various ores, the most important being molybdenite (MoS2), which is converted to molybdenum trioxide (MoO3) for use in ferro- and manganese alloys, chemicals, catalysts, ceramics, and pigments.

MOLYBDENUM DISULPHIDE POWDER

Part No. RXSOL-60-6604-996
Molybdenum disulfide is used traditionally in greases for bit lubrication. In addition, polymers of 2-methylpropene (i.e., isobutene) and metal soaps are used to formulate synthetic greases [7]. A viscosity of 600-750 c P at 120 °C is desir…
MOLYBDENIUM METAL POWDER

MOLYBDENIUM METAL POWDER

Part No. RXSOL-60-6604-995
Molybdenum Powder is a gray metal powder with uniform color and no visible mechanical impurities. Molybdenum Metal Powder is usually prepared with ammonium paramolybdate or calcined MoO3 as the raw material and reduced with hydrogen.

MOLECULAR SIEVES 5A X 1.5 mm

Part No. RXSOL-60-6604-994
Molecular sieve adsorbents are crystalline aluminosilicates, known as zeolites. Their unique structure allows the water of crystallization to be removed,leaving a porous crystalline structure

MOLECULAR SIEVES 4A X 1.5mm

Part No. RXSOL-60-6604-993
Molecular sieves are used for drying gases and liquids and for separating molecules on the basis of their sizes and shapes.

M NITROPHENOL INDICATOR

Part No. RXSOL-60-6604-991
Cookies from this website are used to ensure its correct functioning, to remember your preferences and with analytical and user behavioral purpose.

MINTROLEUM LR

Part No. RXSOL-60-6604-990
MINTROLEUM LR a mixture of aliphatic hydrocarbons, is majorly used as a laboratory solvent. It mainly contains pentane and hexane. Petroleum ether has properties similar to ether and is used in cosmetics, detergents, paint, and varnish,

MINTROLEUM AR

Part No. RXSOL-60-6604-989
MINTROLEUM AR Clear & colourless liquid with characteristic odour. Solubility. Miscible with methanol, benzene & ether. Boiling range (60-80°C). Min 95.0%.

MILLONS REAGENT

Part No. RXSOL-60-6604-988
Millon's reagent is prepared by dissolving mercuric nitrate in nitric acid, and then adding water to dilute it. The reagent is used in Millon reaction test wherein few drops of the reagent are added to the test solution, and then heated gen…

METOL For PhotoARaphic Purpose 4-Methylaminophenol Sulphate

Part No. RXSOL-60-6604-987
The Environmental Working Group (EWG) lists methylparaben as being a low to moderate health hazard. However, the hazard is only in regards to allergic reactions or product usage exceeding the recommended level. The EWG lists methylparaben's…

METHYL P HYRDROXYBENZOATE SODIUM SALT

Part No. RXSOL-60-6604-986
Methyl 4-hydroxybenzoate has antimicrobial characteristics and is used as preservative in pharmaceutical formulations and cosmetics. It can be combined with other parabens like propyl 4-hydroxybenzoate or ethyl 4-hydroxybenzoate. Methylpara…

METHYL P HYRDROXYBENZOATE LR

Part No. RXSOL-60-6604-985
Methyl-4-hydroxybenzoate. Methyl-4-hydroxybenzoate (methyl paraben) along with the other esters of p-hydroxybenzoate (parabens) are the most widely used preservatives in food, drugs, and cosmetics. Schamberg, I.L., Allergic contact dermatit…

METHYL iso BUTYL KETONE AR

Part No. RXSOL-60-6604-983
Methyl isobutyl ketone is used as a solvent for gums, resins, paints, varnishes, lacquers, and nitrocellulose. Methyl isobutyl ketone is a ketone. The ketones acetone and methyl ethyl ketone are used as solvents due to their low molecular w…

METHYLENE BLUE FOR MICROSCOPY

Part No. RXSOL-60-6604-982
Methylene Blue is a popular alkaline stain used to view microscopic life in brilliant color. It helps make cells show up against their background, where their shape can help you determine what they are (their morphology).

METHYLENE BLUE ALKALINE LOFFLERS STAINING SOLUTION

Part No. RXSOL-60-6604-981
Methylene Blue Loeffler reagent is used for staining acidoresistant bacteria according to Ziehl-Neelsen, utilizing the dye's property to stain almost all the bacterial cell's elements in a mildly alkaline medium (Methylene Blue Loeffler rea…

METHYLENE BLUE AQUEOUS STAINING SOLUTION

Part No. RXSOL-60-6604-980
Methylene blue is used to stain animal cells to make their nuclei more observable. It is a component of staining media such as Wright's stain and Jenner's stain. Methylene blue is used to stain blood films/smears used in cytology and to sta…

METHYLAMMONIUM CHLORIDE FOR SYNTHESIS

Part No. RXSOL-60-6604-979
It is an ammonium salt composed of methylamine and hydrogen chloride. ... Methylammonium iodide is the most commonly used, whereas using the chloride instead of, or as minor substituent to, the iodide provides the ability to tune the absorp…

METHYLAMINE SOLUTION 40%

Part No. RXSOL-60-6604-978
Methylamine solution may be used as a LC-MS/MS mobile phase in the perchlorate analysis of milk and yogurt samples. It may be used in the synthesis of the following: 9-fluorenylmethyl N-methylcarbamate and tert-butyl N-methylcarbamate. It h…