G 50 Marine 210 Ltrs Manufacturer, Distributor, Exporter and supplier in Maharashtra , India

RX CHEMICALS is leading one Largest Supplier, Manufacturer and Exporter of G 50 Marine 210 Ltrs in Maharashtra, Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli.

Product Information:
G 50 Marine 210 Ltrs : RXSOL-20-2026-210
A very strong  cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.  It is a low toxic product with an exceptional solvency power on soil & oily  matter. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials.

Product Application:

• . Liquid water based strong alkaline cleaning agent.
• · Rxsol G 50 Marine  is a very suitable tank cleaning agent.
• · Removes oil, fats, fatty acids and mineral pollution.
• · Suitable to use on additives (pure).
• · Also used on chemical contamination in tanks.
• · Suitable on ferro metals and stainless steel.
• · Rxsol G 50 Marine is easily washed out of tanks.
• · Can be used with sea water
• · Rxsol G 50 Marine  contains a water-hardness stabiliser

Using Procedure:
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL G:50,  is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method  – Using RXSOL G:50 as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
Injection Method :  not applicable.
Re-circulation Method :
Fill the tank with fresh water and heat up to warm 50 oC .IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of RXSOL G:50 to make a 2.5 to 5% solution.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.

Product Note:
** Make sure to take all safety precautions are followed when handling / spraying RXSOL G:50**
Safety Aspects
Avoid contact with eyes and skin.
in case of irritation rinse with plenty of water.

Product Technical Specification:
PH : 13
Phys. properties : Clear to yellowish liquid
Spec. gravity: 1.2
Cold stability : -8°C
Foam formation : Slightly foaming product
Solubility in H2O : Good in any concentration

Available Packing Size: 20, 25, 210 Ltr.

RX CHEMICALS offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of G 50 Marine 210 Ltrs using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping a ready stock of G 50 Marine 210 Ltrs Manufacturer, Distributor, Exporter and supplier in Maharashtra for more information, any support and price, Feel free to contact us through our Email id 123 @ rxchemicals.com

We are presently operative in all over India and you can buy our products from various location Like Andhra Pradesh, Tamilnadu, Gujarat , West Bengal  and also all seaports of India. We do have many satisfied customers in this Industries because of our QUALITY, PRICING & SERVICE. Our Company is also a Major Exporter & Mfg of G 50 Marine 210 Ltrs in  UAE, Oman , Vietnam, Europe, Africa, Bahrain, Qatar, Africa & many more countries.

Supply Locations :
Maharashtra , Mumbai, Thane, Navi Mumbai, Panvel, Raigad, Chiplun, Ratnagiri, Kudal, Kolhapur, Sangli, Karad, Satara, Pune, Nashik, Sambhaji Nagar, Ahmadnagar, Palghar, Tarapur( Boiser) , Dhule, Nandurbar, Jalgaon, Kurkumbh (Daund), Osmanabad, Latur, Nanded , Buldhana, Amaravati, Vashim, Akola, Nagpur, Vardha, Yavatmal, Chandrapur, Bhandara, Gadchiroli, All over Maharashtra.