FREE SHIPPINGFree shipping on all orders over 100000 INR.

Evaporator Treatment Chemical

0
No votes yet

Product Qty Per Unit: 
25.00
Product usage unit: 
Ltr.

Negotiate Price

Product Delivery Locations: 
Navi Mumbai, Vashi, Turbha, Rabale, Pawna, Nerul, Taloja, Nashik, Pune, Nagpur, MIDC, Vapi ... More locations >>
Generic Name: 
VapourTreatment
Highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc.
Product Description: 

VapourTreatment  (For controlling of Scale & Foam)
This is a highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc.

RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and antifoaming agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water .

A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators
 

Product Application: 

Procedure Of  Use and Dose Rates: POLYELECTROLYTE  polymer  of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and  easily removed  from  the evap -orator  line .Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR.And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators

Product Procedure: 

Dosage :

Daily Out Put Evaporator Daily  RXSOL VT 6001 Requirement
10  - 20 MT 100-200 ML
30 – 40 MT 300-400 ML
50 – 60 MT 500-600



Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting  i.eThis will last 24 hours.

Note: We can remover  existing  mineral scale deposits  by using  A  5-10%  solution of  RXSOL-51-6001-020

Product Note: 

Improves the quality of distilled water

Product Technical Specification: 
CharactersItics   Properties
Appearance Thermal Firmness Clear  yellow liquid 250° C            By keeping heat transfer surfaces free of scale , Ensures that the evaporator works at maximum efficiency.
Density In g/cm3 at 15°C: 1.1

Permits more efficient evaporation.

pH (1 Vol%) 9

Reduces downtime and maintenance costs.

Compatibility   Concentrated, safe liquid, easy and economical dosing.
Metal No known effect

For use in both high pressure and vacuum evaporators

Rubber No known effect The antifoaming properties ensure that distillate quality is high
Packaging

20 / 25 ltr

Improves the quality of distilled water

Product pack size: 

Product alias: 
<p> REMIDOL 1500, Green Eva, Care Treat 1 Evaporator, Evatreat Evaporator Treatment., ET 109 NorChem</p>

Evaporator Treatment Chemical manufacturer and supplier in Mumbai, Fujairah, Muscat, Nairobi Kenya, Kolkata, Chennai, Vizag, Gandhidham, Dubai, sharjah, Ajman, Abudhabi, Barka Sohar Oman, Canada Africa Jinja Uganda

Why Evaporator Treatment Chemicals must use?

PREVENTION OF SCALING IN SEA WATER EVAPORATORS.
RXSOL Vapor Treatment Prevents scale formation at temperatures up to 160°C Also Reduces foaming and maintains optimum plant performance.

 

During distilled water production in seawater evaporators, SCALE CONTROL is very important to increase efficiency of distillation as the seawater contains large quantities of salt which is resulting SCALE FORMATION in heat transfer surfaces.  Scale deposits Not only lower plant efficiency by resisting the transfer of heat, But also damaging instruments. Routine use of RXSOL Vapor Treatment prevents Scale formation in the Evaporator SYSTEM.

Whats the Dose Ratio of RXSOL VAPOR TREATMENT Chemicals?

Dilute the RXSOL VAPOR TREATMENT chemicals with water and continuously inject via evaporator inlet or the salt water supply lineand dose into the evaporator system. 30 ml Dose per ton of Seawater is recommended for the prevention of scaling in seawater evaporators. Dose can vary  depends on the capacity and the operating conditions of the evaporator.
Note: for the gradual removal of existing scale deposits, at least twice the normal dose must be used. Remove deposits of more than 2mm, with Descalex Liqui
Articles: 
Remarks: 

We are chemicals ship chandlers. We supply to all foreign trading, Seismic, and offshore vessels.

We acknowledged as one of the leaders  in chemicals ship supplier and services to various satisfied national and international clients.

The company is registered with the port authorities of Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kandla, Mundra, Kolkata, Haldia, Paradip, Buj Buj, Fujairah, Sharjah, Dubai and many more.

We are specialized in fields such as Oil & Gas, Offshore, Petrochemical, Power, Marine and General Industry. One of the leading stockiest of major ship consumable Ship Deck, Engine, Cabin, Stores, Provision & Bonded, items. Suppliers of Bunkers/Lube Oil/Fresh Waters etc

Our varying experiences in this field enable us to give our customer's prompt & efficient services at all the major and minor ports on East, West and South coast in India to various cargo, tankers and passenger vessels. We supply to offshore platforms and offshore supply vessels round the clock at a very unmatchable price and terms of payment.

We are chemicals supplier for main engines, Generators, Air compressors, Purifiers, Pumps, Hydraulic equipment, Fresh Water generator, tank cleaning chemicals, hold cleaning chemicals, Water treatment chemicals, Fuel Oil Treatment chemicals etc... we are able to supply within a short time to sell the same to the owners/managers of the ships at a very cheap & competitive rate. Having sailed on vessels we realize the importance of speedy action in getting the right spares and hence we try and supply the parts in the shortest possible time. We have developed good relations with the manufacturers of engines & can trade directly with them as & when required by you. Not only does this save the company cost of getting the right and good reliable parts but also ensures that the parts that reach the vessel are right ones and can be used immediately on board.

To expand our wider range of supply and services to the oil/gas industries and offshore oil drilling. We supply full range of chemicals for Fabrication, Motor Rewinding, Carpentry, Hull Cleaning, Plumbing maintenance - DRAIN CLEANER, Laundry etc... 

We wish to serve you in near future and hoping to establish a better relationship with you. We therefore, request you to kindly give us one opportunity to serve you and refer to us your esteemed organization enquiries as and when required by your fleet of ships. Looking forward to hear favorable response to cater the entire ship requirement at the ports of Mumbai free of cost & to Nhavashiva, Goa (Mormugao), Magdalla, Hazira, Dahej, Kandla, Jamnagar, Bhavnagar, Bedi, Okha, Chennai, Vishakapatnam, kakinada, Kolkata - Buj buj, Haldia, Paradip, Fujairah, Dubai, Sharjah and other major and minor ports on the east and west coast of India and Middle East.

Our company’s goal is quite simple :
"To provide the finest service possible at the most competitive prices".