Acid Neutralizer

Acid Neutralizer

Part No. RXSOL-68-6803-030

Acid Neutraliser is a alkaline solution

Acid Neutraliser is a alkaline solution for the neutralisation of acidic solution and waste. It contains an in built pH indicator to provide a visual colour change when neutralisation of spent acidic waste has been completed.

Key details

Part number RXSOL-68-6803-030
Generic name Acid Neutraliser is a alkaline solution
Available pack sizes 1 Kgs, 2 Kgs, 5 Kgs
Supply locations Acid Neutralizer manufacturer and supplier in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Abudhabi, Oman, Bahrain.
Usage unit Kg.Liq
Quantity per unit 30

Need this product at your port or plant?

Enquire Now

Acid Neutraliser is a alkaline solution for the neutralisation of acidic solution and waste. It contains an in built pH indicator to provide a visual colour change when neutralisation of spent acidic waste has been completed.

Acid Neutraliser allows users of pickling paste and other acidic metal treatment products to comply with pH requirements of trade waste water regulating authorities.

Appearance : dark pink alkaline liquid; mixes with water
pH : 12.0 ± 0.5
Specific gravity : 1.14 - 1.16
Solubility in water : miscible

Acidic water causing problems for system. Acid neutralizer help to raise the pH levels.

SAFETY PRECAUTIONS

Acid Neutraliser is an alkaline solution so that contact with skin and eyes is avoided. Wear eye goggles and appropriate protective clothing. If the product comes in contact with the skin immediately wash affected area thoroughly with water and soap. Seek medical attention in the event of irritation. If required remove and rinse contaminated clothing.
 

If the product comes in contact with the eyes, immediately hold the eyes open and wash with fresh running water. Ensure irrigation under the eye lids by occasionally lifting upper and lower lids. If pain persists or recurs, seek medical attention.
 

PACKAGING
Acid Neutraliser is packed in 2 Ltrs, 5 Ltrs, 20 litres, 25 Ltrs  & 210 litres.

DIRECTIONS FOR USE

1) Neutralisation of retained acidic waste For every litre of spent Acidic waste, add approximately 1.7 litres of Acid Neutralizer. The Acid Neutralizer on contact with the spent acid waste will go clear. Keep on adding Pickling Paste Neutraliser solution till a faint pink coloration exist.

If neutralisation has not occurred with the initial dosage, then add additional quantities of Acid Neutraliser at 100ml per litre of waste until colour change is observed.


2) Diagnostic Use After washing the Acidic material and while still wet, spray the Acid Neutraliser solution directly onto the area where the pickling gel was applied, in particular in corners and crevices. If residual acid is present an effervescent reaction will occur. Flush with water thoroughly once the effervescence has stopped.

Avoid contact with skin or eyes.

PH Neutraliser Acidic

Acid Neutralizer

Need Acid Neutralizer for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a Quote