Descalant Powder with Colour Indicator
Powdered Inhibited Acid Descaler Cleaner with colour indicator Inhibitor can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils
Powdered Descalant - Safe Acid Descaler mixture and Cleaner with colour pH indicator with Acid Inhibitor. RXSOL Powder Scale mixture effectively dissolves Calcium and Mineral scale depsoits. it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.
Very useful and effective products for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.
Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.
- Non-combustible solid
- Also can be use for removal of loose corrosion products, Organic Foulant, And deposition of clay and SILT deposit.
- Biodegradable chemical compound without FUMES increases its popularity and also makes it EASY to HANDLE.
DIRECTION OF USAGE
• Machines should be rinsed with water to remove loose flakes & sludge's before use
• Powder should be added to warm water for an ideal solution
• The sample should be properly tested before using
• Proper ventilation is essential for effective use of Sulfamic Acid Descalant
• After cleansing, the solution should be drained out and the system should be rinsed with water until pH value is neutral
• Rinsing with ROTO PASS – 212 for better metal prevention and passivation is recommended
At room temperatures, dilute aqueous Sulfamic Acid solution is stable for a long time but rapid hydrolysis occurs at elevated temperatures. Its solution is less corrosive toward metals than another mineral acid. When compared to most of the common strong mineral acids, Sulfamic Acid has desirable water descaling properties, low volatility, low toxicity and is a water-soluble solid forming soluble calcium and iron-III salts. Because of its many positive attributes like handling ease, solubility and low corrosiveness, Sulfamic Acid is used for many diversified applications.
The self-indicating grade that changes colours to indicate that the efficiency of material has been finished.
Colourless Solution showing Powerful Strength.
Light Brown-Yellow Solution indication Poor strength, In this stage addition of more powder required to dissolve the scale.
Blue colour solution will result in neutralization of Acidic Power, After completion of Descaling process system must be neutralized with ALKALI SOLUTION. When we'll put alkali solution into the used descaler - solution, Acidic power will get neutralized and BLUE colour will develop.
Powdered Inhibited Acid Descaler with Colour pH Indicator
Packing
Inhibited Powder Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request.
Advantages of using Descalant Powder with Colour Indicator
- High shelf life.
- Specific storage/handing arrangement doesn't required hence no adulteration possible.
- Very high scale Dissolving Power.
- The solid can be directly charged to system eliminating the cost of system reduces the leave of scaling solids and acts as anti - descalant.
- Accidental excess dosing does not affect the metal of the circulating system but it acts to remove the deposited scale from the system.
-
It is recommended to does into the cooling water for descaling the condenser on running plant.
Descalant Powder with Colour Indicator is used for descaling.
• RXSOL-37-8865-025 is very efficient descaling agent and is widely used for cleaning a variety of industrial equipments, especially boilers, condensers, cooling tower and pipelines.
Scale and Rust Remover (Powder)
RXSOL-37-8865-025 is a dry acid cleaner formulated to remove rust and scale deposits from boilers, diesel engine cooling water systems, condensers, evaporators, calorifiers and heat exchangers.
This product is compatible and suitable with aluminum, copper, zinc, galvanized metals, steel boilers etc.
Powder Acid for Removal of Scale and Rust
White crystalline soild, non-volatile, non-volatile, non hydroscopic. Soluble in water and odorless. Toxic by ingestion.
Uses: Metal and ceramic cleaning, amine sulfamates, ph control, hard water scale removal, electroplating.
APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form.
Appearance |
Reddish / Yellowish / white – Powder ( without indicator ) |
| Density | 1.2g/cm3 |
| pH | (10 wt %):1.1 |
| Compatibility |
| Metal | Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber | Rubber | No known effect |
| Rubber | No known effect |
The self-indicating grade that changes colours to indicate that the efficiency of material has been finished.
Colourless Solution showing Powerful Strength.
Light Brown-Yellow Solution indication Poor strength, In this stage addition of more powder required to dissolve the scale.
Blue colour solution will result in neutralization of Acidic Power, After completion of Descaling process system must be neutralized with ALKALI SOLUTION. When we'll put alkali solution into the used descaler - solution, Acidic power will get neutralized and BLUE colour will develop.
Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection
This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025 at least 2-4 house, up to neutrial of PH valve.
Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-37-8865-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised solutions can be re-activated by adding more RXSOL-54-1008-025 until the red colour reappears. This should not be done more than twice. RXSOL-37-8865-025 should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.
Fields: Descaling of Boilers, Descaling of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-37-8865-025 in water. After use of RXSOL-37-8865-025 a 0.5% solution of Alkalinity Control in fresh water should be used for neutralization.
Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder RXSOL-37-8865-025. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.
After using RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.
• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
Why Use RXSOL Descaler?
- It is a safe , economical concentrated chemical to be used on the waterside of heat transfer equipment.
-
You do not have to heat RXSOL-37-8865-025 .
RXSOL-37-8865-025 is safer for the employees to use than other acid products. -
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
- Cleans down to the original surface without pitting.
- RXSOL-37-8865-025 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
- RXSOL-37-8865-025 will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
- Removing the scale build up allows your equipment to operate more efficiently with less down time.
Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters
RXSOL-37-8865-025 Descaler Descalant Powder with Colour Indicator manufacturer and supplier in Kakinada, Visakhapatnam, Andhra pradesh, Mumbai, Navi Mumbai MIDC, Panvel, Taloja, Pune, Nashik, Gandhidham, Kandla - GIDC, Mundra, Jamnagara, Sikka, Surat Hazira, Chennai Ennore, Kolkata, Howrah, Paradip,Sohar, Barka Muscat Oman, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Diera, UAE Middle East, Varanashi, Patna, Ranchi, Tata, Munger, Nairobi Kenya Africa, Canada
#SulfamicACID_AlexandriaEgypt
Efficiency :Rapid Softening, disintegration and dissolving of scales.
Economy
By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.
Handling & Storage
Safety
• No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.
• Keep in a tightly closed container. Protect from physical damage.
• Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.
• Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
• Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
