Formic Acid
Product Qty Per Unit:
300.00
Product usage unit:
Kg
Product Delivery Locations:
Navi Mumbai, Vashi, Turbha, Rabale, Pawna, Nerul, Taloja, Nashik, Pune, Nagpur, MIDC, Vapi ... More locations >>
Generic Name:
Methanoic Acid
Formic acid use as a preservative, antibacterial agent, cleaning agent and coagulant in rubber industries.
Product Description:
Formic Acid exporter and supplier. Formic Acid also used as preservative and Anti bacterial agent and also used in during the process of textile and leather.
Product Application:
Formic acid is as a preservative and antibacterial agent.
Formic acid arrests certain decay processes and causes the feed to retain its nutritive value longer, and so it is widely used to preserve winter feed for cattle. In the poultry industry, it is sometimes added to feed to kill E. coli bacteria.
Use as preservative for silage and (other) animal feed.
Formic acid is also significantly used in the production of leather, including tanning, and in dyeing and finishing textiles because of its acidic nature.
Use as a coagulant in the production of rubber.
Formic acid is also used in place of mineral acids for various cleaning products such as limescale remover and toilet bowl cleaner.
Use as a coagulant in the production of rubber.
Formic acid is also used in place of mineral acids for various cleaning products such as limescale remover and toilet bowl cleaner.
Product Procedure:
Formic acid also enables rapid and long-lasting deicing agent for runways and roads :::
Formates, the salts of formic acid, rapidly remove thin layers of ice and effectively prevent new snow from sticking or a new layer of ice from forming. Also, the waste water polluting effect is much less than that of other deicing agents because of their good biodegradability and low oxygen demand during the breakdown process. Depending on the concentration of the deicing agent, the freezing point is reduced to as much as minus 50 degrees Celsius.
In the past, urea was the preferred deicing agent for airport runways. Because urea has a high impact on the environment, potassium acetate and potassium formate soon replaced urea. In fact, potassium formate is gradually replacing potassium acetate because it is even more efficient and eco-friendly.
In the past, urea was the preferred deicing agent for airport runways. Because urea has a high impact on the environment, potassium acetate and potassium formate soon replaced urea. In fact, potassium formate is gradually replacing potassium acetate because it is even more efficient and eco-friendly.
Product Note:
Product Technical Specification:
PRODUCT NAME | : | FORMICACID |
CAS number | : | 64-18-6 |
UN number | : | 1779 |
Formula | : | HCOOH |
Odour | : | PENETRATING |
Solubility in water | : | COMPLETE |
Density | : | 1.22 at 20 oC |
Boiling point | : | 101oC |
Melting point | : | 8 oC |
Viscosity | : | 1.80 cp at 20oC |
Flashpoint | : | 42oC |
Explosive limits | : | 10 – 45.5 Vol% |
Vapour pressure | : | 42 mbar at 20oC |
Skin absorption/irritation | : | YES |
TLV Country NL Year 1995 | : | 5 ppm 9 mg/m3 |
Pollution category 1994 | : | D |
Product pack size:
Product alias:
<p>
Methanoic Acid, HCOOH, CH2O2, FORMIC ACID</p>
#FORMICacid_Exporter
#formicacid_supplierMUSCAT
#FORMICacid_Dubai
#formicACID_nairobiKENYA
#FormicAcidSupplierinUAE
#FormicAcidinUAE
#FormicAcidinDubai
#FormicAcidinSharjah
38249090
CHEMICAL VALUABLE WORD :
ACGIH is the American Conference of Governmental Industrial Hygienists. It recommends upper limits (called TLVs) for exposure to workplace chemicals.
ACGIH is the American Conference of Governmental Industrial Hygienists. It recommends upper limits (called TLVs) for exposure to workplace chemicals.
A carcinogen is a substance that causes cancer.
The CAS number is assigned by the Chemical Abstracts Service to identify a specific chemical.
A combustible substance is a solid, liquid or gas that will burn.
A corrosive substance is a gas, liquid or solid that causes irreversible damage to human tissue or containers.
DEP is the Department of Environmental Protection.
DOT is the Department of Transportation, the federal agency that regulates the transportation of chemicals.
EPA is the Environmental Protection Agency, the federal agency responsible for regulating environmental hazards.
A fetus is an unborn human or animal.
A flammable substance is a solid, liquid, vapor or gas that will ignite easily and burn rapidly.
The flash point is the temperature at which a liquid or solid gives off vapor that can form a flammable mixture with air.
HHAG is the Human Health Assessment Group of the federal EPA.
IARC is the International Agency for Research on Cancer, a scientific group that classifies chemicals according to their cancer-causing potential.
A miscible substance is a liquid or gas that will evenly dissolve in another.
mg/m3 means milligrams of a chemical in a cubic meter of air. It is a measure of concentration (weight/volume).
A mutagen is a substance that causes mutations. A mutation is a change in the genetic material in a body cell. Mutations can lead to birth defects, miscarriages, or cancer.
NAERG is the North American Emergency Response Guidebook. It was jointly developed by Transport Canada, the United States Department of Transportation and the Secretariat of Communications and Transportation of Mexico. It is a guide for first responders to quickly identify the specific or generic hazards of material involved in a transportation incident, and to protect themselves and the general public during the initial response phase of the incident.
NCI is the National Cancer Institute, a federal agency that determines the cancer-causing potential of chemicals.
NFPA is the National Fire Protection Association. It classifies substances according to their fire and explosion hazard.
NIOSH is the National Institute for Occupational Safety and Health. It tests equipment, evaluates and approves respirators, conducts studies of workplace hazards, and proposes standards to OSHA.
NTP is the National Toxicology Program which tests chemicals and reviews evidence for cancer.
OSHA is the Occupational Safety and Health Administration, which adopts and enforces health and safety standards.
PEL is the Permissible Exposure Limit which is enforceable by the Occupational Safety and Health Administration.
PIH is a DOT designation for chemicals which are Poison Inhalation Hazards.
ppm means parts of a substance per million parts of air. It is a measure of concentration by volume in air.
A reactive substance is a solid, liquid or gas that releases energy under certain conditions.
A teratogen is a substance that causes birth defects by damaging the fetus.
TLV is the Threshold Limit Value, the workplace exposure limit recommended by ACGIH.
The vapor pressure is a measure of how readily a liquid or a solid mixes with air at its surface. A higher vapor pressure indicates a higher concentration of the substance in air and therefore increases the likelihood of breathing it in.
Remarks: