FREE SHIPPINGFree shipping on all orders over 100000 INR.

Pneumatic Submersible Pump

0
No votes yet

Product Qty Per Unit: 
0.00
Product usage unit: 
Box

Negotiate Price

Product Delivery Locations: 
Navi Mumbai, Vashi, Turbha, Rabale, Pawna, Nerul, Taloja, Nashik, Pune, Nagpur, MIDC, Vapi ... More locations >>
Category: 
Pump & Accessory-21
Generic Name: 
Pneumatic Sump Pump

Suitable to empty ballast tanks bilge wells etc.in emergency cases often used for draining cargo.

Product Description: 

Suitable to empty ballast tanks,bilge wells,etc.in emergency cases often used for draining cargo and after the washing procedure.especially preferred where an electric spark may risk ignition or explosion .air pressure is 0.59MPa(6kgf/cm2)

Product Application: 

 

IMPA CODE

CAPACITY 

MAX. ALR CONSUMPTION

WATER HOUSE SIZE

AIR HOUSE SIZE

 

LIFT

DISCHARGE

591635

15

22m3/H

2.0m3/min

50mm

3/4

591636

20

28m3/H

3.4m3/min

50mm

3/4

591637

25

38m3/H

4.4m3/min

50mm

1

 
Product Procedure: 
Product Note: 
Product Technical Specification: 

STORAGE:

When storing a sump pump for any length of time precautions should be taken to prevent corrosion and to maintain the pump in a serviceable condition.

  • Remove discharge and exhaust hose or pipe and run a pump out of water to blow out all moisture.

  • Remove the air line and pour a small amount of rust resistant oil in the live air inlet, re-connect hose and idle motor for a few minutes to carry oil to all internal parts.

  • Remove air hose and plug air inlet and air exhaust post with corks.

  • Wipe out the pump with rust resisting oil. Wrap pump in oiled paper and pack in covered box.

  • Store pump in dry place.

  •  
Product pack size: 
Product alias: 
<p> Pneumatic Sump Pump</p>


Sr.no 

Description 

Causes

1

Pump stopped and will not start

Insufficient air pressure

Check air pressure is as recommended at the pump air inlet.

Air filtered blocked

Check if debris has clogged the inlet filter on the FRL unit/pump inlet air valve(some models have air filter on the air inlet valve) and ensure clear passage of air

Internal damage or excessive wear on components

Proceed to dismantle the pump, examine components for wear,replace any worn components, reassemble carefully as instructed in this manual and re-start the pump.

2

Pump runs slowly, poor delivery.

Insufficient or wrong lubricant in the air supply.

Ensure that the lubricant is as per the recommended chart, a thicker lubricant aften makes the air valve work sluggishly.


Internal damage or excessive wear on components

Proceed to dismantle the pump,examine components for wear, replace any worn components,ressemble carefully as instructed in this manual and re-start the pump.

3

Motor is jammed

Worn or damaged rotor blades

Dis-assemble governor housing (7)and motor housing (35) clean all parts in a light solvent.replace worn or damaged parts and reassemble.

 
 

Pneumatic Submersible Pump manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Pneumatic Submersible Pump at a competitive price from us. We have ready stock of Pneumatic Submersible Pump in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Remarks: